Descargar Imprimir esta página

Aurlane CAB277 Manual Del Usuario página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
EN
Before filling your cabin with water, it is essential to check the tightness of the entire cabin and make sure that the water
pressure circulating in the circuit is not too high. The pressure must be between 2 and 4 bars. Too much pressure could
damage the piping and cause leaks.
Too much pressure could damage the piping and cause leaks.
In order to prevent yourself from any bacterial infection, it is important to clean your shower cubin regularly.
Please follow the cleaning instructions for this and do not use any cleaning product
Do not use cleaning agents containing acetone, chlorine or ammonia water (bleach). The use of such a product
would automatically lead to rapid deterioration of the chrome elements.
CAUTION IN THE CONTEXT OF THE USE OF THE CABIN BY CHILDREN: only leave the use of the cabin
unsupervised to responsible children who have understood the instructions given by their parents concerning
the use of such a shower cabin .
For all persons with reduced mobility, sensory or mental disposition, the use of this cabin must be carried out
under supervision or that they have received instructions from the persons responsible for their safety.
Do not use electrical devices inside the cabin.
Is the installation of your shower cabin now complete?
CLEANING & MAINTENANCE
REGULAR CLEANING :
Use a shower sponge with a neutral pH detergent (multi-surface household
cleaner, dishwashing liquid). If it is difficult to remove the dirt, use white
alcohol vinegar diluted with water then rinse with clear water. Remove the
bung cap regularly to remove hair that may cause clogging.
LIMESTONE CLEANING :
Use a soft cloth and lemon juice and/or warm white alcohol vinegar then
rinse with clear water. The easiest way to keep your doors and shower stall
clean is to use a squeegee. If you wipe the walls of the cabin directly after
taking a shower, you will minimize the formation of limescale on the
surfaces.
Never use a cleaner containing polishing grains, acetone, chlorine,
ammonia (bleach) or any other aggressive acid-based cleaner. This
type of products reacts with effects like scratches, against chrome.
USE
CAUTION
13

Publicidad

loading