Operating Your Beverage Cooler - Orien FSB-245OD Manual Del Usuario

Do Not Use an Extension Cord
Avoid the use of an extension cord because of potential safety hazards under certain
conditions.

Operating Your Beverage Cooler

IMPORTANT: Do not plug in the Beverage Cooler for 24 hours after unit is set in place.
Failure to do so may result in the unit working improperly.
Two-Compartment Design
The FSB-245OD Beverage Cooler has two separate compartments. Each compartment has
its own door and separate control panel. The right-hand compartment has 3 adjustable
chrome-plated flat wire shelves and a wire basket to hold cans and bottles of beverages
such as beer, water and soft drinks. The left hand compartment of the FSB-245OD comes
equipped with 5 horizontal wire racks and an inclined rack that can hold a total of 18 standard
wine bottles. This design enables you to operate one or both compartments and also allows
you to set a different temperature for each compartment. Each control panel displays the
current temperature inside that compartment and allows you to turn the interior lights on and
off independently of each other. The operating instructions below apply to both
compartments and must be implemented separately.
OPERATING INSTRUCTIONS
Turning On the Unit
The Beverage Cooler turns on automatically when it is plugged in.
If you want to use the Automatic Temperature (default) setting, do nothing further. The FSB-
245OD will automatically set the temperature in the wine compartment at 55ºF (13ºC) and in
the beverage compartment at 41ºF (5ºC). If you want to set other temperatures, see below.
Temperature Settings
While wines store best at temperatures around 56-58ºF, the FSB-245OD outdoor unit also
allows you to store wine at drinking temperatures. Generally, RED WINE should be kept at 60-
61ºF and WHITE WINE, which is usually served chilled, is best kept at 54-55ºF. For beer
and soft drinks, choose the temperature setting that is most agreeable to you and your
guests.
6