Timed Defrosting; Cleaning And Maintenance; Cleaning The Outside - Orien FSB-245OD Manual Del Usuario

Racks, Basket and Shelving
The racks, shelves and basket in your unit are chrome-plated so they will not rust. The
racks pull out only 1/3 of the way. This is a safety feature so that neither the machine nor the
rack will tip over. Space between shelves is adjustable.
Special Features of the FSB-245OD Outdoor Beverage Cooler
Because this model is intended for outdoor use, it has several noteworthy features. The outer
cabinet of the unit is made of weather-resistant stainless steel. The plastic trim and the glass in
the doors have been specially treated to minimize the effects of the sun' s harmful ultraviolet
(UV) radiation. This unit can withstand outdoor temperatures from 100ºF to 25ºF, and has a
built-in heater that will activate itself automatically when the temperature gets too low. The
FSB-245OD has been "tropicalized" with extra condenser lines to help handle excessive
ambient temperatures.

Timed Defrosting

Another feature of the FSB-245OD beverage cooler is that the defrosting cycle will begin
automatically once the power has been on for 12 hours. Because of the low temperatures
inside the unit, frost or ice may begin to accumulate. During the defrosting cycle, the interior
fans run and the ice melts. The water thus produced flows to the bottom of the unit and collects
in the drip tray on top of the compressor, where heat from the compressor should evaporate
it. (Check occasionally to see if the tray needs to be dumped manually.) When the defrosting
cycle is complete, the unit will resume normal operation.
During the defrosting cycle, the LCD display will show the average temperature inside the unit,
and the word STOP will flash once a second. During defrosting, temperatures inside the unit
will rise a little.
Normal defrosting time for the FSB-245OD is 20 minutes.

Cleaning and Maintenance

Cleaning the Outside

Unplug your Beverage Cooler. Clean the outside of your unit with a cloth dampened in mild
soapy water. Dry thoroughly with a soft cloth. To clean the door gasket, use only mild soapy
water. Never use harsh cleansers or scouring pads to clean any part of your Cooler.
Cleaning the Inside
Unplug your Beverage Cooler and remove its contents. Rinse the inside surfaces with plain
water and dry the chrome racks, basket and shelving.
8