DSC PowerSeries neo 3G8080-EU Manual De Instalación página 22

Menu
1
---Z-Wave Home ID
---Extended Range Option
---Communications Test
User Functions
Press [*][6] [Master Code] to enter User Functions menu. Then scroll to Interactive Services
Menu
--HSPA Module Status
---Radio
---HSPA Freq.
--SN
---SIM card
---Version
---Advanced - Network
1
--Z-Wave Setup
---Number of Z-Wave Devices
---Add Z-Wave Device
---Remove Z-Wave Device
1
---Z-Wave Home ID
--Communication Test
1
Refer to the Home Automation installation instructions and guides on the Alarm.com Dealer Site for more
information on Z-Wave enrollment and troubleshooting.
Press [*] to query the Z-Wave network Home ID. If the ID is 0, verify that the
module has communicated with Alarm.com and that the Alarm.com account is set
up for Z-Wave.
Press [*] to enable/disable extended range
Press [*] to perform ADC communication test
See Installer Programming section
See Installer Programming section
See Installer Programming section
See Installer Programming section
See Installer Programming section
See Installer Programming section
See Installer Programming section
See Installer Programming section
1
See Installer Programming section
1
See Installer Programming section
1
See Installer Programming section
See Installer Programming section
See Installer Programming section
Description
Description
- 22 -