WolfPack Z1J-DD25-13B Manual De Instrucciones página 13

AVOID UNINTENTIONAL STARTING.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is off when plugging it
in.
WHEN OPERATING THE APPLIANCE OUTDOORS, ONLY USE EXTENSION CABLES
SUITABLE FOR OUTDOOR USE. CHECK THE EXTENSION CABLE FOR NECESSARY
MARKINGS FOR OUTDOOR USE.
ALWAYS STAY ALERT AND WATCH WHAT YOU ARE DOING.
Use common sense when operating the appliance. Do not use the appliance while you are
tired, sick or under the influence of alcohol, drugs, medication or other substances that could
affect your ability to react.
CHECK THE APPLIANCE FOR DAMAGES.
If you notice any damages in the appliance, in its guards or other parts, do not use it until
it has been repaired in an authorized service center. Check for alignment of moving parts,
free running of moving parts, breakage of parts, mounting and any other conditions that may
affect the appliance operation. Damaged parts should be properly repaired or replaced by an
authorized service center unless otherwise indicated in this instruction manual. Have de- fective
switches replaced by an authorized service facility. Do not use the appliance if the switch does
not turn it on and off.
USE ONLY ORIGINAL SPARE PARTS AND ACCESSORIES.
The use of any other spare parts or accessories than original parts may cause a risk of per-
sonal injury.
REPAIRS SHOULD ONLY BE CARRIED OUT BY AN AUTHORIZED SERVICE CENTER
USING ONLY ORIGINAL SPARE PARTS, OTHERWISE THIS MAY RESULT IN
CONSIDERABLE DANGER TO THE USER.
GENERAL PRECAUTIONS FOR USE
- If possible, wear designated gloves for protection from splinters and shavings.
- While working, wear designated protective goggles. Flying shavings can cause injury.
- Wear ear protection when using the impact drill. Exposure to noise can cause hearing loss.
- Use auxiliary handle supplied with the tool. Loss of control can cause personal injury.
- Before drilling into walls, check the work area with a metal detector for hidden electric cab- les
and gas or water supply lines. Cutting accessory contacting a "live" wire may make ex- posed
metal parts of the tool "live" and could give the operator an electric shock. Cutting gas lines can
cause an explosion. Cutting a water pipe can cause an electric shock.
13