Publicidad
Idiomas disponibles
Idiomas disponibles
- Hold the tool by insulated gripping surfaces when there is danger that the tool may contact
hidden or visible wires. Cutting accessory contacting a "live" wire may make exposed metal
parts of the tool "live" and could give the operator an electric shock.
-Hold the tool with both hands.
- Disconnect the tool from power supply before changing the drill bit or maintenance.
- To avoid injuries, securely attach the workpiece with a vice or a clamp.
- Do not force the motor while driving and removing screws so that it turns off.
- Do not handle materials that contain asbestos. Asbestos is considered carcinogenic. Take
protective measures when dust that is harmful to one's health, combustible or explosive can
develop during working Some dusts are for example considered carcinogenic. Wear a dust
mask and work with dust extraction when it is connectable.
- Wait for the complete cessation of blades before placing the unit down. The tool insert can
jam and lead to loss of control over the power tool.
- Do not touch tool housing after use. It can be hot.
TECHNICAL DATA
Voltage
Power
Rotation speed
Keyless chuck
Max. capacity:
Weight
Noise and vibration values
Sound pressure level, LpA
Sound power level, LwA
Vibration (weighted)
This product fulfils the requirements of quality class HA 2807
WARNING: Always wear ear protection where the sound level exceeds 85 dB (A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protec- tion,
stop using the tool immediately and check the ear protection is correctly fitted and pro- vides
the correct level of sound attenuation for the level of sound produced by your tool.
steel
concrete
wood
14
230 V ~ 50 Hz
1050 W
0–2800 rpm
13 mm
13 mm
13 mm
25 mm
1,9 kg
>70 dB (A)
>80 dB (A)
<2.5 m/s2
Publicidad
