Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do
not operate the tool with hands below a normal comfortable temperature, as vibration will
have a greater effect. Use the figures provided in the specification relating to vibration to
calcu- late the duration and frequency of operating the tool. Sound and vibration levels in the
spec- ification are determined according to EN60745 or similar international standards. The
fig- ures represent normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of noise and vibration.
PRODUCT DESCRIPTION
This machine is intended for the drilling of wood, plastic and metal as well as for the impact
drilling of concrete, stone and brick. All other use is absolutely forbidden.
Parts
1. Chuck
2. Drilling / Impact drilling switch
3. Depth gauge
4. Auxiliary handle
5. Left/right rotation switch
6. ON/OFF switch
7. Lock-on switch for continuous use
PRIOR TO USE
Unpack the appliance and check that all parts are included. If any part is missing or dam- aged,
contact your dealer immediately. Dispose all packing material according to local regu- lations.
Handle installation
Never use the impact drill without the auxiliary handle. The auxiliary handle provides addi-
tional support and allows you to work exhaustion-free. The handle is intended for both right-
and left-handed persons. Fix the handle as follows:
1. Loosen the tightening knob of the handle by turning it counter-clockwise.
2. Guide the drill chuck of the impact drill through the handle.
3. Then turn the handle to the position which is best for you.
4. Turn the tightening knob clockwise until the handle sits tightly and can no longer be moved.
1
3
4
15
2
5
6
7
Publicidad
