WIKA GDI-100-D Manual De Instrucciones página 39

10. Specifications
Base instrument
Menu functions
Mean value interval
2)
Data logger
Material
Wetted parts
Case
Voltage supply
Power supply
Battery life
Battery status display
Permissible ambient conditions
Operating temperature
Medium temperature
Storage temperature
Relative humidity
Case
Dimensions
Process connection
Ingress protection
Weight
1) The user-defined units can only be set via the "My WIKA Device" software. The GDI-100-D must be fitted with WIKA-Wireless.
2) To use the logger function, "My WIKA device" software is needed. The logger data can be downloaded as CSV file.
WIKA operating instructions, model GDI-100-D
Density measurement:
■
Power-off function, measuring rate, mean value filter, pressure
rate, mean value (via adjustable interval), indicator damping
Pressure measurement:
■
Min./Max. alarm (visual), Power-off function, measuring rate,
mean value filter, pressure rate, mean value (via adjustable
interval), level indication, tare offset, indicator damping
1 ... 300 seconds, adjustable
Cyclic logger: Automatic recording of up to 1,000,000 values;
Cycle time: Selectable from 1 ... 3,600 s in steps of 1 second or by
measuring rate in the following steps:
Density measurement: 1/s, 3/s
Pressure measurement: 1/s, 3/s, 10/s and 50/s
Stainless steel 316L
Aluminium die-casting, nickel-plated
3 x 1.5 V AA alkaline batteries
Typically 2,000 ... 2,500 h (without backlighting and WIKA-Wireless
not active)
Symbol display with 4 bars indicates the battery status in 25 %
steps.
-10 ... +50 °C [14 ... 122 °F]
-10 ... +50 °C [14 ... 122 °F]
-20 ... +70 °C [-4 ... +158 °F]
< 95 % r. h. (non-condensing)
Approx. 100 x 150 x 59 mm [3.9 x 5.9 x 2.3 in]
G ½ B
IP65
Standard: incl. batteries approx. 680 g [1.5 lbs]
with protective rubber cap: approx. 820 g [1.81 lbs]
EN
39