Publicidad
Idiomas disponibles
Idiomas disponibles
MAKING THE CONNECTION
Microphones, music instruments and audio units with line level can be connected. To
avoidinterfering noise, switch off the PA system or set the output controls to minimum prior
to connecting and disconnecting equipment.
Use standard XLR or 6.3mm jack to connect microphones to the inputs of channel 1 - 2 and
press in the rispective level switch MIC/LINE. These inputs also accept audio devices with
line level. Then release the level switch. Channel 2 also accepts Hi impedance instruments
such as electric guitars or bass. Adjust the input level with the corresponding HI-Z button.
Connect audio device with line level to the RCAinputs or 3.5mm jack of channel 3. Use
standard stereo RCA or jack cables to connect a CD player, keyboard, or mp3 player to this
input. Select the input jacks with the PLAYER/AUX switch. Otherwise, channel 3 is will play
the signal of the integrated audio player.
CONNECTING TWO OR MORE PA SYSTEMS IN SERIE
For larger indoor PA applications where the sound has to be radiated as even as possible,
two or more PA systems may be daisy chained. Connect your signal sources to the primary
unit and connect the line output MIX OUT to one of the line inputs of the secondary unit,
press the corresponding MIC/LINE switchto set the input to line level. Connect further units
likewise. The MIX OUT jack provides the mixed signal of the sources; adjusted with individual
level controls and tone controls. Alternatively, you can connect other units with line level
inputs (ex mixer, recording unit) to the output.
6
Publicidad
