Epson TM-H6000II Manual Del Usuario página 22

English
Cleaning the Card Image Scanner
See illustration G.
The glass part of the scanner may become dirty due to ink or paper
dust, which can decrease the image quality. To avoid this, clean the
glass part every 12 months.
1. Open the roll paper cover.
2. Push the blue tab down in the direction indicated by the arrow
and pull it toward you to open the card feed path.
3. Wipe the glass gently with a soft, dry cloth.
Note:
When cleaning the scanner glass, do not use any liquid, such as detergent,
benzine, or water.
Liquids can reach the back of the scanner glass and cause it to become dirty. If
the scanner glass has foreign matter that is hard to remove, such as oil or
grease, you can wet a cloth a little with alcohol and wipe the scanner glass,
but never put any liquid directly on the scanner glass.
EPSON Ecology Label
This product is in compliance with the EPSON ecology label
requirements. Please see the following link for detailed information on
label criteria. (http://www.epson.co.jp/e/)
12 TM-H6000II with Image Scanner User's Manual