Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
EN
The GWN7800 series are Layer 2+ managed network switches that allow small-to-medium enterprises to build scalable, se-
cure, high performance, and smart business networks that are fully manageable. It supports advanced VLAN for flexible and
sophisticated traffic segmentation, advanced QoS for automated detection & prioritization of latency sensitive voice/video traf-
fic, IGMP Snooping for network performance optimization, and comprehensive security capabilities against potential attacks.
The PoE models provide smart dynamic PoE output to power IP phones, IP cameras, Wi-Fi access points and other PoE
endpoints. The GWN7800 series can be managed in a number of ways, including the local network controller embedded in the
GWN7800 series switch, any GWN7000 series router with integrated local master, Grandstream's free on-premise network
management software (GWN Manager), as well as Grandstream's cloud network management platform (GWN.Cloud). The
GWN7800 series are best value enterprise-grade managed network switches for small-to-medium businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for operation and -10 °C to 60 °C for storage.
• Do not expose the GWN7800 to environments outside of the following humidity range: 10-90% RH (non-condensing) for
operation and 5-95% RH (non-condensing) forstorage.
• Do not power cycle your GWN7800 during system boot up or firmware upgrade. You may corrupt firmware images and
cause the unit to malfunction.
PACKAGE CONTENTS
GWN7800 Series Switch
1x 1.2m (10A)
1x Power Cord Anti-Trip
AC Cable
PORTS & LED INDICATORS
GWN7801/GWN7801P
1
2
8
No.
Port & LED
Description
1
Port 1-8
8x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7801P Ethernet ports support PoE and PoE+.
2
1-8
Ethernet ports' LED indicators
3
Port SFP1/2
2x 1000Mbps SFP ports
4
SFP 1/2
SFP ports' LED indicators
5
CONSOLE
1x Console port, used for connecting managing PC
6
RESET
Factory Reset pinhole. Press for 5 seconds to reset factory default settings
7
SYS
System LED indicator
8
100-240VAC 50-60Hz
Power socket
9
Lightning protection grounding post
1x 25cm Ground
4x Rubber
8x Screws (KM 3*6)
Installation Guide
Cable
Footpads
Rack Mounting Kits
Extended Rack Mounting Kits
2x (GWN7802(P)/GWN7803(P))
2x (GWN7801(P))
5
3
6
7
4
9
~ 1 ~
GWN7802/GWN7802P
10
No.
Port & LED
1
Port 1-16
2
1-16
3
Port SFP1/2/3/4
4
SFP 1/2/3/4
5
RESET
1x Quick
6
SYS
7
CONSOLE
8
100-240VAC 50-60Hz
9
10
Fan
GWN7803/GWN7803P
1
2
No
Port & LED
.
1
Port 1-24
2
1-24
3
Port SFP1/2/3/4
4
SFP 1/2/3/4
5
RESET
6
SYS
7
CONSOLE
8
100-240VAC 50-60Hz
9
10
Fan
1
3
2
9
8
GWN7802P
Description
16x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7802P Ethernet ports support PoE and PoE+.
Ethernet ports' LED indicators
4x 1000Mbps SFP ports
SFP ports' LED indicators
Factory Reset pinhole. Press for 5 seconds to reset factory default settings
System LED indicator
1x Console port, used for connecting managing PC
Power socket
Lightning protection grounding post
1x Fan
3
9
8
GWN7803
10
8
Description
24x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals.
Note: GWN7803P Ethernet ports support PoE and PoE+.
Ethernet ports' LED indicators
4x 1000Mbps SFP ports
SFP ports' LED indicators
Factory Reset pinhole. Press for 5 seconds to reset factory default settings
System LED indicator
1x Console port, used for connecting managing PC
Power socket
Lightning protection grounding post
2x Fans
~ 2 ~
6
5
7
4
9
8
GWN7802
6
5
7
4
9
GWN7803P
Publicidad
