IKIER K1 Pro MAX Guía Para Operar página 45

HOW TO OPERATE THE ENGRAVER MACHINE
1.PC Software ：
Mac OS：LightBurn
Windows：LightBurn & LaserGRBL
Download LightBurn from below website :
https://lightburnsoftware.com/download/
Download LaserGRBL from below website :
http://lasergrbl.com/download/
LOCK：Security Lock，It can only be opened with a key
ON/OFF：Power On / Off
ALARM：When the limits touched, flame detected, tiltition detected，the alarm works
USB：Insert USB flash drive to update firmware or run the engraving file offline
RESET：Restart the engraver
HDMI：Connect the touch screen controller to the control board with the HDMI cable
TYPE-C：Connect the control board to PC with the Type C cable, when running files with Lightburn or LaserGRBL
INPUT：The engraver power input
OUTPUT：Output 12V DC power supply for air assist，connect the air assist to the control board with the air assist power cable
Scan QR code for
detail intallation and use instruction
2.Mobile APP ：
Download "IKIER" App from
the Apple and Android app stores
USB
RESET
HDMI
TYPE-C
INPUT
OUTPUT
3.Offline：
Use with K1 touch screen controller
Read the following instructions for use
LOCK
ON/OFF
ALARM
- 41 -