Publicidad
Idiomas disponibles
Idiomas disponibles
en
1
General information
1.1
About these instructions
These instructions form part of the product. Compliance with the instructions is essential for correct hand-
ling and use:
•
Read the instructions carefully before all activities.
•
Keep the instructions in an accessible place at all times.
•
Observe all product specifications.
•
Observe the markings on the product.
The language of the original operating instructions is German. All other languages of these instructions are
translations of the original operating instructions.
1.2
Copyright
WILO SE © 2023
The reproduction, distribution and utilisation of this document in addition to communication of its contents
to others without express authorisation is prohibited. Offenders will be held liable for payment of damages.
All rights reserved.
1.3
Subject to change
Wilo shall reserve the right to change the listed data without notice and shall not be liable for technical inac-
curacies and/or omissions. The illustrations used may differ from the original and are intended as an exem-
plary representation of the product.
2
Safety
These operating instructions contain basic information which must
be adhered to during installation and operation. For this reason, these
installation and operating instructions must, without fail, be read by
the service technician and the responsible qualified personnel/oper-
ator before installation and commissioning.
Not only must the general safety instructions listed under this main
"Safety" section be adhered to, but also the special safety instruc-
tions that are marked by danger symbols and included under the fol-
lowing main sections.
2.1
Identification of safety instructions
These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
28
Installation and operating instructions • Wilo-Connect module BMS • Ed.02/2023-10
Publicidad
