Publicidad
Idiomas disponibles
Idiomas disponibles
DANGER
Risk of fatal electrical shock!
For voltage > 30 V AC or > 42.4 V DC:
• To prevent a wire that has become loose from the terminal from wandering to the SELV,
the supplied cable sleeve must be used as illustrated in Fig. (1).
S E L V
> 30 V AC
(1)
> 42,4 V DC
8
Commissioning / Functional test
NOTICE
Testing in conjunction with the connected installation is recommended.
For some settings, the installation and operating instructions for the pump are required.
8.1
Settings
The Wilo-Connect module is set via the operating elements of the connected pump.
The operating modes and basic menu descriptions of the pump are described in the respective installation
and operating instructions.
Main menu (Homescreen)
The main menu shows the current settings/statuses of the pump in operation (example setting).
Select "External module" in the main menu
Installation and operating instructions • Wilo-Connect module BMS • Ed.02/2023-10
Connecting a voltage
> 30 V AC or > 42.4 V DC
Item 1:
Blue frame around the setpoint display field:
The Wilo-Connect module BMS controls the pump. A set-
point adjustment on the pump's operating button is not
1
possible.
Item 2:
Active influences: Current signal input on the Wilo-Con-
nect module BMS that influences the pump:
0-10 V, Ext. OFF, Ext. MAX, Ext. MIN
2
en
41
Publicidad
