DJI C8000 Guia Do Usuário página 7

Idiomas disponibles

2. Connect the battery to the battery station.

Make sure to place the charging battery on the same side that the charging cable is

fixed to the battery station.

3. Make sure all cables are correctly connected and press the power button on the operation

panel of the battery station. The two LEDs and the warning indicator will flash simultaneously.

After powering on, the only lights remaining will be the charging status LEDs, which represent

the batteries currently connected. This indicates that self-diagnosis is complete and the

device is working normally. For more information about how to check if there are any errors

during self-diagnosis, refer to the LEDs and Warning Indicator Description. Alternatively,

connect the battery station to a remote controller and launch the app for more detailed

information about the errors.

4. If no errors are detected during self-diagnosis, the battery station will begin to charge the

batteries.

Using DB2000 Intelligent Flight Batteries: if two batteries are connected simultaneously, the

battery station will charge the battery with less power first. When the two batteries show

the same power, the battery station will charge the batteries simultaneously.

Using other batteries: if two batteries are connected simultaneously, the battery station will

charge the batteries in order of their power level, starting from highest to lowest.

Before use, make sure there are no obvious defects on the battery station or batteries

(e.g., jams, breakages, or short circuits).

DO NOT power the battery station on unless the batteries are correctly connected.

When using DB2000 Intelligent Flight Batteries, the battery station will warm

up a battery to 22° C (72° F) before charging if the battery station detects a low-

temperature battery. When using other batteries, the battery station will automatically

adjust the charging current based on the condition of the batteries. For example, if

the battery temperature is below 15° C (59° F), the charging current will be limited and

the charging time will be longer. The charging time depends on the battery model and

battery temperature. The lower the battery temperature, the longer the charging time

will be. The charging temperature range varies depending on the battery model. Refer

to the document of the battery to check the charging temperature range.