TP-Link TL-ER6020 V2 Guia De Instalacion página 7

Installation
Desktop Installation
■
To install the device on the desktop, follow the steps below:
*For models without attachable rubber feet, skip steps 3 and 4.
1. If there are detachable antennas, install the antennas
first.
2. Set the device on a flat surface to support the entire
weight of the device with all fittings.
3. Remove the adhesive backing papers from the rubber
feet.
4. Turnover the device and attach the supplied rubber feet
to the recessed areas on the bottom at each corner of
the device.
Rack Installation (Only for Certain Models)
■
If your device is provided with rack-mountable brackets,
you can install the device in a rack. Follow the instructions
described below:
Feet
Bottom of the device
Notch
5
English