Descargar Imprimir esta página

Sage the Tea Maker STM800 Guia Del Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
CUSTOMISING BREW TIME
Brew time less than 10 minutes
Press the right
ARROW UP button to
increase the time, or the right
DOWN button to decrease the time.
Manual mode-brew times
over 10 minutes
i) Press the right
to increase the time up to the maximum
10 minutes.
ii) Continue to press the right
UP button. The LCD screen will display
'MANUAL LIFT' and '- - : - -' on the right
side of the LCD.
iii) Once the Tea Maker
the correct water temperature is reached,
the basket will automatically lower.
iv) Once the desired brew time has elapsed,
press and hold the BASKET button for 2
seconds. The basket will rise.
AUTO START FEATURE
1. Press and hold the AUTO START button
for 2 seconds.
2. To set the CURRENT TIME, press the
left
ARROW UP button to increase
the time, or the left
button to decrease the time in 1 minute
increments.
3. To set the START TIME, press the right
ARROW UP button to increase the
time, or the right
button to decrease the time.
4. Once current time and start time are
programmed, press either the flashing
HOT WATER / Cancel or TEA / Cancel
button to select which feature you would
like to start at the programmed time.
10
ARROW
ARROW UP button
ARROW
is activated and
ARROW DOWN
ARROW DOWN
5. Ensure that the Tea Maker
with:
a) Sufficient water in the glass jug and
tea leaves in the basket for the tea
brewing cycle or,
b) Sufficient water in the glass jug for the
water heating cycle.
NOTE
Insufficient water may discolour your
Tea Maker
base!
NOTE
The 'Auto Start' feature can be cancelled
anytime by pressing the AUTO START button.
is prepared

Publicidad

loading