Publicidad
Idiomas disponibles
Idiomas disponibles
EN GLI SH
MITRE SAW STAND
DE7023, DE7033
Congratulations!
You have chosen a D
WALT tool. Years of
E
experience, thorough product development and
innovation make D
WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
Length
mm
Length (with bars extended) mm
Height
mm
Maximum working load
kg
Weight
kg
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
18
General Power Tool Safety Warnings
DE7023
DE7033
1765.3
1092.2
3835.4
2540.0
810
810
227
227
16
14
General Safety Instructions for Mitre
Saw Stands
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
WARNING: For your own safety,
read the mitre saw instruction
manual before using any accessory.
Failure to heed these warnings may
result in personal injury and serious
damage to the mitre saw and the
accessory. When servicing this tool, use
only identical replacement parts.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: To reduce the risk of
personal injury:
• ALWAYS use eye protection. All
users and bystanders must wear eye
protection.
• ALWAYS check the stability of the mitre
saw stand and the mitre saw attached to
it before putting the stand or the saw into
use.
• DO NOT mount any power tool other
than a mitre saw to this stand. Mounting
other power tools to this stand could
result in severe personal injury.
• DO NOT exceed the weight this stand
can hold. The main center beam of the
mitre saw stand is designed to support
227 kg safely in a work environment. It is
unsafe to climb, sit or stand on the stand.
• Follow the mounting instructions carefully.
Fasten the tool to the saw mounting
brackets securely as instructed.
• DO NOT modify or use stand for
operations for which it is unintended.
• DO NOT use the stand on uneven
surfaces. The stand is designed to be
used on a flat, stable surface.
Publicidad
