Inserting/Removing Cassette; Inserting Cassette Into The Cassette Compartment; Removing Cassette From Player; For Protection Of Important Recording - JVC KV-V8 Manual De Instrucciones

Inserting/removing cassette

Inserting cassette into the cassette compartment

Removing cassette from player

KV-V8
MOBILE VIDEO CASSETTE PLAYER
PAUSE

For protection of important recording

Protection tab
How to play back VHS-C cassette tape recorded by Video Movie
STEREO
SQPB
PLAY REW FF STOP / EJECT
Insert a video cassette with the label side up into the
cassette compartment by gently pressing the center
part.
•With insertion of a video cassette into the cassette
compartment, the player is automatically turned
on. (Automatic power on function)
•The tape counter is reset to 0:00:00. (Automatic
counter reset function)
•Inserting a cassette automatically starts playback.
(Automatic playback function)
•When the car is shaking, it is hard to insert a casette
because the machine is apt to hold the cassette firmly
to prevent the cassette from vibration. In such a case,
insert the cassette strongly or pull the cassette out of
the player once and again try to insert it.
Press the EJECT button while in the stop mode.
•Don't insert fingers or foreign substances into the
cassette compartment. When a little child is near
the video cassette player, pay heed to him/her not
to do so.
•If a video cassette is inserted in wrong posture, it is
automatically ejected by the function of the protec-
tion mechanism. If it happens, wait for a few sec-
onds and try to insert it correctly once again.
Break the recording protection tab of the cassette.
•If you want to use the cassette whose recording
protection tab was broken for recording, cover the
broken part with adhesive tape double.
•Use an optional VHS cassette adapter to play back
VHS-C cassette tape.
5