Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING
This product
requires
assembly.
• Carefully
remove
the product
and any a ccessories
from the box. Make sure t hat all i tems listed inthe
packing
list are included.
• Inspect the product carefully
tomake sure no
breakage
or damage
occurred
during shipping.
• Do not d iscard
the packing
material
until you have
carefully
inspected
and satisfactorily
operated
the
product.
• Ifany p arts are damaged
ormissing,
please call
1-888-266-7096
for a ssistance.
• Secure the lower handle tothe bracket
with the
handle
knob (6)in e ach side.
INSTALLING
SIDE DISCHARGE
DEFLECTOR
See Figure 4.
• Lift the side discharge door (1).
• Align the grooves on the deflector (2) with the pins
on the underside of the door.
• Lower the deflector (2) until the hooks on the mower
deck are secured in the openings in the deflector.
• Release the deflector and door.
INSTALLING
THE MULCHING
PLUG
See Figure 5.
PACKING
LIST
Mower
Side Discharge
Deflector
Mulching Plug
Grass Catcher
Operator's
Manual
_i,
WARNING!
If any parts are damaged
or
missing do not operate this product until the parts are
replaced.
Failure to heed this warning so could result
in serious personal injury.
i_i,
WARNING!
Do not attempt to modify this
product
or create
accessories
not recommended
for use with
this product.
Any
such
alteration
or
modification
is misuse and could result in a hazardous
condition leading to possible serious personal injury.
_i,
WARNING!
Do not connect to power supply
until assembly
is complete.
Failure to comply could
result
in accidental
starting
and possible
serious
personal injury.
'_
WARNING[
Never operate the mower without
the proper safety devices in place and working. Never
operate
the mower
with
damaged
safety
devices.
Failure
to heed this warning
can result
in serious
personal injury.
ASSEMBLING
THE HANDLE
See F_u_
3.
• Remove
any
packing
material
which
may be
between
the upper and lower handles
for shipping
purposes.
• Pull up and back on the upper handle to raise the
handle
into the operating
position.
Make
certain
the lower handle
is seated
securely
into the handle
mounting
bracket.
NOTE: When
using the mulching plug, do not install
either
the side discharge
deflector
or the grass
catcher.
• Lift the rear discharge door (1).
• Grasp the mulching plug (2) by its handle and tilt at
an approximate
15 degree angle.
• Insert the plug into the rear discharge opening.
• Lower the rear discharge door.
INSTALLING
THE GRASS CATCHER
See Figure 6.
NOTE: When
using the grass catcher,
do not install
either the side discharge
deflector
or the mulching
plug.
• Lift the rear discharge door (1).
• Lift the grass catcher by its handle and place under
the rear discharge
door so that the hooks (2) on the
grass catcher are seated on the door rod (3).
• Release
the rear discharge
door. When
installed
correctly,
the hooks on the grass catcher will extend
through the openings
on the rear discharge door.
SETTING
BLADE
HEIGHT
See Figure 7.
When shipped,
the wheels
on the mower are set to
a Iowcutting
position.
Before
using
the mower
for
the first time, adjust the cutting
position to the height
best suited for your lawn. The average
lawn should
be between
1-1/2 in. to 2 in. during cool months and
between
2 in. and 3-1/4 in. during hot months.
To set the blade height:
• To raise
the
blade
height,
grasp
the
height
adjustment
lever and move it toward the back of the
mower.
• Align the holes (3) between
the upper
handle (1)
• To lower
the
blade
height,
grasp
the height
and lower (2) handles.
Insert the bolts (4) and tighten
adjustment
lever and move it toward the front of the
them with the wing nuts (5) provided,
mower.
8 -- English
Publicidad
