Safety Controls - ProBreeze PB-H05 Manual De Instrucciones

SPECIFICATION
- Rated Voltage and Frequency: 220-240V, 50Hz
- Wattage: 2000W
- Size: 47.5cm x 26cm x 67cm
- Net Weight: 13.4kg

SAFETY CONTROLS

This heater has three levels of protection.
Automatic Thermal Cut-Off: If set to High power and overheating is detected the
1.
automatic thermal cut-off switches the heater from High power to Medium power.
Once the temperature drops to a normal level the heater will automatically return
to High power. Please note that the specific power setting and the respective
lights illuminated will not visibly change as the heater lowers the heating setting.
Thermal Fuse: If the automatic thermal cut-off fails to operate, the thermal fuse
2.
will activate and cut the power to the heater. This is a non-resettable switch that
will have to be professionally replaced.
Safety Tip-Over Switch: If the heater tips over the safety tip-over switch will
3.
activate and cut the power to the heater. Once the heater is returned to the upright
position it will resume operating at the chosen settings.
ASSEMBLY
1. Turn the radiator upside-down on a scratch
-free and stable surface to prevent damage
to the paint finish or your floor surfacing.
2. Gently extend the wheels from the closed
position to the open position until they click
into place.
3. Turn the radiator back upright.
Caution: Only operate the radiator when in its normal upright position with the wheels in
the open position.
3 | English