vigo CORNELIUS VG05004 Manual Del Usuario página 3

FLOW RATE REGULATIONS
This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the
provided restrictor. Doing so will remove the ability for the product to meet certain low flow standards. Please
talk to your local or statewide plumbing enforcement agency prior to modifying. Vigo is not responsible for any
alterations and the affects that may come with altering the product post sale and highly advises that the client
only install the product that meets the needs of their local plumbing code.
Flow rate with installed restrictor (pink) - 1.2 gpm
Flow rate with restrictor provided in box (orange) - 1.5 gpm
BRASS
CONNECTOR
3
1. Loosen the two set screws at the bottom of
the spout. Pull the spout off of the faucet. Pull
the spout plate away from the wall.
2. Unscrew and remove the brass connector with
the pink 1.2 gpm restrictor inside.
SPOUT PLATE
SET SCREWS
SPOUT
3. Replace with the brass connector with the
orange 1.5 gpm restrictor inside by screwing it
back in. Replace the spout plate and spout by
tightening the two set screws at the bottom of
the spout.
BRASS
CONNECTOR