SICK GTB6L Instrucciones De Uso página 7

2.2 Intended use
2.3 Qualification of personnel
3 Product description
3.1 Product identification via the SICK product ID
3.2 Operating and status indicators
8025391.1K3A/2023/07/04 | SICK
Subject to change without notice
The GTB6L is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects. If the product is used
for any other purpose or modified in any way, any warranty claim against SICK AG shall
become void.
Any work on the product may only be carried out by personnel qualified and authorized
to do so.
Qualified personnel are able to perform tasks assigned to them and can independently
recognize and avoid any potential hazards. This requires, for example:
• technical training
• experience
• knowledge of the applicable regulations and standards
SICK product ID
The SICK product ID uniquely identifies the product. It also serves as the address of the
web page with information on the product.
The SICK product ID comprises the host name pid.sick.com, the part number (P/N),
and the serial number (S/N), each separated by a forward slash.
The SICK product ID is displayed as text and QR code on the type label and/or on the
packaging.
Figure 2: SICK product ID
Photoelectric proximity sensor with background suppression.
GTB6L-xxx1x
3
2 3
1
1
Potentiometer: sensitivity adjustment
1
OPERATING INSTRUCTION
2
O P E R A T I N G I N S T R U C T I O N | GTB6L
en
7