Torin BIG RED T815015L Manual De Instrucciones página 11

TO ADD JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Remove the oil plug.
Oil Plug
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
4. Replace oil plug and perform the Air Purge
Procedure.
Oil Plug
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise.
3. Remove the oil plug.
Oil Plug
4. Turn the jack on its side to drain old oil from the
oil fill hole.
11