Descargar Imprimir esta página

Troy-Bilt V560 Serie Manual Del Operador página 12

Ocultar thumbs Ver también para V560 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
5
Starting Engine
WARNING:
Be sure no one other than the operator
is standing
near the lawn mower while starting
engine or operating
mower. Never run engine
indoors or in enclosed,
poorly ventilated
areas.
Engine exhaust
contains
carbon monoxide,
an
odorless and deadly
gas. Keep hands, feet, hair and
loose clothing
away from any moving
parts on
engine and lawn mower.
Follow the set of instructions
pertaining
to your unit. Refer to
engine
manual for help with the engine.
Briggs & Stratt0n Engine:
I.
If equipped,
push primer three times. Wait about
two
seconds between
each push. See Fig. 5-I. In temperature
around 55 ° F or below, prime five times. Do not prime to
restart a warm engine.
2.
Standing
behind
the mower, squeeze the blade control
against
upper handle.
3.
Holding
these two handles together
firmly, grasp recoil
starter handle and pull rope out with a rapid, continuous,
full arm stroke. See Fig. 5-I. Keeping a firm grip on the
starter handle, let the rope rewind
slowly. Repeat until
engine cranks. Let the rope rewind
each time slowly.
Honda Engine:
I.
Place the fuel valve lever found
on the left side of the
engine into the ON (OPEN) position.
See Fig. 5-2.
2.
Move the choke lever (if equipped)
all the way backward
into the choke position.
3.
Standing
behind
the mower, squeeze the blade control
against
upper handle. The choke will now begin to slowly
return to the off choke position
after activating
the blade
control. Therefore,
quickly
move onto step four below.
4.
Holding
these two handles together
firmly, grasp recoil
starter handle and pull rope out with a rapid, continuous,
full arm stroke. See Fig. 5-2. Keeping a firm grip on the
starter handle let the rope rewind
slowly. Repeat until
engine cranks. Let the rope rewind
each time slowly.
Stopping Engine
1.
Release blade control
to stop the engine and blade.
WARNING:
Wait for the blade to stop completely
before performing
any work on the mower or to
remove the grass catcher.
f
Figure 5-1
f
Figure
5-2
J

Publicidad

loading