Descargar Imprimir esta página

Craftsman 125.12001 Manual Del Operador página 3

Ocultar thumbs Ver también para 125.12001:

Publicidad

Idiomas disponibles

Idiomas disponibles

starting, unplug p ower cord before
changing orcleaning filter.
• Donotleave Wet/Dry Vac unattended
when plugged i n.Unplug from outlet
when notinuseand before s ervicing.
•Turn offWet/Dry Vac before u nplugging.
• Donotputanyobject into ventilation
openings. Donot v acuum withany
ventilation openings blocked; keep free
ofdust, l int,hair o ranything thatmay
reduce a irflow.
• Keep hair, l oose clothing, fingers, and
allparts ofbody away f rom openings
andmoving p arts.
• Toreduce t herisk offalls, u seextra
care when cleaning onstairs.
When using as blower:
• Direct air discharge only at work area.
• Do not use Wet/Dry Vac as a sprayer.
• Do not direct air at bystanders.
• Keep children away when blowing.
• Wear safety goggles.
Polarized
Plug
To reduce the risk of electrical shock, this
appliance has a polarized plug (one with
the blade wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way. Double insulation []
eliminates
the need for the three wire gro_unded
power cord and grounded power supply
system.
Observe
the followingwarnings
that
appear
on the motorhousing
of your Vac:
'_
OUBLE INSULATED
GROUNDING
NOT REQUIRED.
WHEN SERVICING
USE ONLY
IDENTICAL
REPLACEMENT
PARTS.
A
WARNING
= For your own safety, read and
understand owner's manual.
o Do not allow unit to be in operation if
unattended.
Do not pick up hot ashes, coals,
toxic, flammable or other hazardous
materials.
, Do not use around explosive liquids
_or vapors,
j
WARNING:
To reduce the risk of
electric shock = do not expose to rain =
store indoors.
,_, WARNING: When using as a blower:
Wear safety goggles labeled "ANSI
Z87.1" (Canada CSA Z94.3) on the
package. Turn unit off before setting on
ground or releasing grasp of handle.
Electric shock could occur if used on
wet surfaces. Direct tool discharge only
at work area. Do not direct discharge at
bystanders. Keep children away.
Extension
Cords
When using an extension cord with your VVet/Dry Vac refer to the following
table to
determine
the required A.W.G. (American Wire Gauge) wire size. Before using
Wet/Dry Vac, make sure it is in good working
condition,
including power cord.
Also, make sure extension
cord is in good working condition
prior to use. Make
repairs or replacements
before using the vacuum cleaner.
Only use extension cords
that are rated for outdoor use.
Length of Extension Cord
25 Feet
50 Feet
100 Feet
150 Feet
110V-120V
7.5 Meters
15.25 Meters
30.5 Meters
45.7 Meters
Amps
A.W.G Wire Size
0-6
18
16
16
14
7-10
18
16
14
12
11-12
16
16
14
12
13-16
14
12
Not recommended

Publicidad

loading