Craftsman 320.39598 Manual Del Operador página 13

CLEANING THE DUST BAG
For more efficient operation, empty the dust bag when it is no more than half full.
This will permit the air to flow through the bag better.
To empty the dust bag
1. Unplug the sander.
2. Remove the dust bag from the sander and shake out the dust.
3. For a more thorough cleaning of
the dust bag, remove the dust Fig. 6
bag from the frame and then
shake out the dust (Fig. 6).
4. Replace the dust bag over
the frame, then reinstall it on
the sander.
_, WARNING: Collected sanding Frame
dust from sanding surface
coatings such as polyurethanes,
Dust bag
linseed oil, etc., can self-ignite in
the sander dust bag or elsewhere
and cause fire. To reduce the
risk of fire, always empty the dust bag frequently while sanding and never
store or leave a sander without totally emptying its dust bag. Also follow the
recommendations of the coating manufacturer.
LIVE=TOOL INDICATOR
LIGHT (Fig. 7)
Your sander also has a live-tool
indicator green light, located on
the motor housing top cap where
the power cord enters the motor
housing. This green light is always
on when the sander is plugged
into a power source.
13