1 SAFETY INFORMATION
1.1 SAFETY WARNINGS
NOTE!
The content of this guide provides
impor tant information for the full
understanding and proper operation
of the CFW500-KDS Solar Detector Kit.
Only use the CFW500-KDS Solar
Detector Kit on WEG CFW500 Solar
Drive.
It is recommended to read the following
manuals before installing or operating
the accessory device:
- CFW500 - User's manual.
- CFW500 - Programming manual.
- CFW500 - SoftPLC manual.
- CFW500 - CRS485.
- CFW500 Solar Pump Drive application
manual.
1.2 PRELIMINARY RECOMMENDATIONS
ATTENTION!
A l way s d i s c o n n e c t th e g e n e r a l
power supply before connecting or
disconnecting the accessories of the
CFW500 Solar Drive.
Wait for at least ten minutes for the full
discharge of the power capacitors.
2 GENERAL INFORMATION
This guide contains directions for the installation,
configuration and operation of the CFW500-KDS
Solar Detector Kit accessory. Combined with the
appropriate solar panel
informs the CFW500 Solar Diver of the radiation
intensity. For further details, refer to the CFW500
- CFW500 Solar Pump Drive Application Manual,
available on WEG website.
3 PACKAGE CONTENT
Upon receiving the product, check if the package
contains:
Accessory in anti-static package.
Installation, configuration and operation guide.
Solar Detector Kit
(Table
1), this accessory
CFW500 KDS | 5