Fix System Of Blade Holder; Installation Of The Blade Holder - Nahita ZFP011 Manual De Instrucciones

When exchanging specimen clamp or loading tissue specimen, the handwheel must be always
locked and the cutting edge covered with the knife guard!

7. Fix system of blade holder

7.1 Installation of the blade holder

1. Pull out waste tray, release adjustment spanner of blade holder (1), push the dovetail
groove of holder forward along with Rail that in the base of instrument. The locking block of
blade holder (2) placed in the microtome base enters the T shape groove (4) of the blade holder.
2. Lock adjustment spanner (1), tighten the blade holder on the base of instrument and insert
waste tray.
Manual de instrucciones Instruction manual 34 Versión Version 2017