Netum DS Serie Manual De Instrucciones página 8

When the dock connects with your device via USB cable, USB HID-KBW feature will
USB HID-KBW
be enabled by default. Scanner's transmission will be simulated as USB key-board
input. It works on a Plug and Play basis and no driver is required.
USB COM Port Emulation
When the dock connects with your device via USB cable, by scanning "USB COM Port
Emulation" will allow your device to receive data in the way as a serial port does.
Note: A driver is required for this feature.
How to transmit data via bluetooth ?
Get Started:
(1)Power on scanner.
(2)Scan "Bluetooth Transmit".
$USB#KEY
*USB HID-KBW
$USB#COM
USB COM Port Emulation
-5-