Netum DS Serie Manual De Instrucciones página 9

(3) Make sure the device is in range with Bluetooth turned on.
(4) Pressing the scan button will initiate the attempts to connect.
(5) If a connection is made, the blue light will stop blinking and turn solid.
(6) If a connection is not made after several attempts, the scanner will emit a
long beep (and the blue light will turn off).
(7) Bluetooth working channel is not set by default.If you want to connect via
bluetooth, you will have to scan "Bluetooth Transmit" before pairing.
• NO software installation needed
Basic Mode (HID) (default)
• Connects to most devices
• Scanner interacts with host device like a keyboard
• For iOS Devices
Application Mode (Apple Speci�ic Serial Pro�ile)
• If you have an iOS application that supports our Scanners this is the mode to use
%#IFSNO$4
Bluetooth Transmit
AT+MODE=2
-6-