HJM ENV396 Instrucciones De Uso página 35

Envasadora_Maquetación 1 07/07/16 12:15 Página 35
HOW TO MAKE CUSTOM SIZED BAGS
Kindly Reminder: Please pre-heat the machine before 1st use. This
is to produce a nice sealing.
1. Pull enough bag material to hold item to be vacuum packaged,
plus 2 inches. With a pair of scissors or sharp knife, cut desired
bag length from bag roll. Make sure to cut in a straight line. Plug
in power cord.
2. Open lid. Place one end of cut bag onto sealing gasket, don't
worry if you accidently place any material onto the gasket area.
3. Close lid firmly by pressing down firmly on both sides, check to
make sure that the lid will not open. If the lid can not be lifted, then
you have successfully locked the lid in place.
NOTE: The sealing strip will NOT work properly unless you lock the
lid. Ensure that the lid has been locked on both sides for proper sea-
ling.
4. Now that the lid has been locked, press the "Seal Only" button to
create a custom sized bag. The indicator light illuminates during
the seal process.
- 35 -