Publicidad
2
EN
SAFETY PRECAUTIONS
WARNING
Ignoring this sign might cause severe personal
injury or death.
CAUTION
Ignoring this sign might cause personal injury or
damage to the product or other items.
CARE AND MAINTENANCE
Ignoring this sign might cause damage to the
product or other items.
WARNING
Product must be installed, repaired and
disassembled by professional installers only;
any other type of intervention may cause
damage to the product.
Do not use the loose power outlet, or it may
cause electric shock or cause fire.
Make sure that the power plug/socket is
waterproof. Kindly entrust professional
personnel to operate.
Do not plug the power plug with wet hands,
or it may cause electric shock or cause fire.
Do not touch the power plug during storms,
or it may cause electric shock.
Do not share the power supply with other
electrical appliances, or it may cause fire
due to overheating.
Do not spray detergent, water, cleaning
agent or urine on the plug, which may
cause electric shock or fire.
Make sure that the power plug is firmly
inserted into the AC 220V/50Hz power
socket, or it may cause electric shock or fire.
Do not damage the power cord plug and
power cord or handle it carelessly. Please
replace it by professionals if out of order.
Otherwise, it may cause short circuit,
electric shock and fire.
Do not put heavy objects on the cover lid
and avoid shocks.
Press the power supply plug reset button,
cut off the power supply, and close the
water-inflow valve to stop water supply if
following cases happen: excessive heating,
smoking, abnormal sound and odour,
product is cracked, damaged or blocked.
It may cause electric shock, injury, fire or
indoor seepage problems if you continue to
use it when it is malfunctioning.
CAUTION
Please pay attention to socket and
installation position.
Please set the circuit breaker to a range of
1.5KVA-3KVA of apparent power. Power
socket installation location should at least
0.5 m above the floor; and keep away from
objects out of water such as shower and
bathtub. Otherwise it may cause water
leakage.
In cold regions, where temperatures can
go below 3˚C, make sure water is flowable
before use, otherwise the product might get
damaged.
Do not insert fingers or objects into the
drying outlet and deodorisation window.
To avoid leakage, do not bend, twist or
damage the water hose.
Do not bend or distort the nozzle by hands
or other tools. Do not urinate onto the
nozzle and the seat cover, or it may cause
the product performance to become weak
or damaged.
Tighten each waterway connection when
installing the product in order to avoid
water leakage.
In case of water leakage, close the water-
inflow valve and ask for the intervention of
a professional installer.
Do not use water, except a clean inlet
supply, as it may cause skin inflammation
and/or product malfunction.
Do not move the seat or cover carelessly.
Otherwise, it may cause the toilet seat fall
off from cover, which may lead to injuries.
Insert the cover seats on fast-install
baseboard from front position. Pull cover
seat softly to confirm cover seat has been
installed successfully or it may cause
injury and weaken the performance of the
products.
Stop using when the seat cover is
malfunctioning.
Persons with health issues should consult
their doctor prior to using this product.
Children shall not play with the appliance.
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction.
The maximum weight allowed is 200kg.
Higher loads can damage the product and/
or cause personal injury.
CARE AND MAINTENANCE
Do not install the product in direct
sunlight to avoid discolouring.
Turn power off before cleaning products.
Make sure power supply and water-inflow
valves are turned off before taking care of
the seat and the product, or it might cause
electric shock or fire.
Turn off power before removing the cover
seat from the toilet or it may cause damage,
electric shock or fire.
Do not immerse or flush the product with
water at the risk of electric shock or product
damage.
Do not use hydrogen chloride cleaning
agent, diluent, pesticides and other non-
neutral detergent to clean the product,
and do not use sandpaper or rough cloth to
scrub it.
Do not use abrasive sponges or aggressive
detergents. Only use neutral detergents and
a soft sponge. Immediately rinse with water
after cleaning.
To prevent scalding users, the seat
temperature will decrease automatically
after 15 minutes.
If you plan not to use the products for a
long time, turn off the water-inflow valve
and flush the toilet. When you use the
product again, fill the tank with fresh water
and flush it before use to prevent problems
related to water quality.
LID AND SEAT CLEANING
1.
Turn off the power and water inlet valves.
2.
Wipe the lid and seat using a soft sponge or
cloth with soap or mild detergent.
3.
Turn on the power and water inlet valves
CERAMIC BODY CLEANING
1.
Turn off the power supply plug.
2.
Clean the ceramic body using a toilet brush
with specified detergent.
3.
Plug in and press the flush button to wash
away the detergent.
NOZZLE CLEANING
1.
Press the posterior/feminine cleaning
button for 2 seconds. After 2 seconds the
nozzle extends out of the machine, then
remove the nozzle.
2.
Wipe the nozzle and spray bar with an old
toothbrush, sponge, or smooth cloth with
soap or mild detergent.
3.
After installing the nozzle, press the stop
button or press the posterior/feminine
cleaning button for 2 seconds and the
spray bar will automatically retract into its
parking position.
Publicidad
