Introduction: About Your Lift; Assembly And Commissioning Instructions; Carton Contents; Oxford/Hoyer Arise Patient Lift - Sunrise Medical Oxford Hoyer Arise Manual De Instrucciones Y Garantía Para El Usuario

4

INTRODUCTION: ABOUT YOUR LIFT

The Oxford/Hoyer Arise is an electrically operated patient lift. Each Arise lift is fully
assembled load tested and certified before being packed/shipped.
The packing consists of a strong, purpose built carton that is used for both export and
domestic markets to ensure the safe arrival of the lift.
A number of documents are supplied in a wallet, and packed with each lift and should
be kept safely for future reference.
• TEST CERTIFICATE
• USER MANUAL
• DEALER GUARANTEE CARD
• CUSTOMER SATISFACTION CARD
• PACKING CHECK LIST
The TEST CERTIFICATE is an important document and will be required for your insurance
records. It is valid for six months and after it has expired the lift should be inspected
and serviced per the maintenance schedule.
Servicing and periodic testing can be carried out by your authorised supplier. Please
ensure your lift is included in their maintenance schedule. If you are at all unsure
what your local market servicing requirements are, please check with your dealer
and/or a local government agency.
The Oxford/Hoyer Arise is suitable for the following CATEGORIES of lift within the
working parameters of the lifts specified in the TECHNICAL SPECIFICATIONS.
• Category A - Wheelchair
• Category D - Toilet/Shower Chair
The CE mark:
The Oxford/Hoyer Arise carries the CE mark and complies
with the following EC directives:
• Medical Device Directive (93/42/EEC)
• EMC Directive (89/336/EEC)
• Low Voltage Directive (73/23/EEC)
294000.10008 Rev. C
E n g l i s h E n g l i s h

CARTON CONTENTS

Place the carton in a clear working area and open carefully. The carton contains:
• OXFORD/HOYER ARISE LIFT
• WALLET CONTAINING DOCUMENTS
• HAND CONTROL
• BATTERY PACK
• CHARGING LEAD
• DESK TOP CHARGER/STAND
The Oxford/Hoyer Arise is heavy and will need to be lifted with care. You may
need assistance to lift the Oxford/Hoyer Arise from the carton.
ASSEMBLY
Remove all the parts from the carton and place on the floor, taking care to protect the
finish from damage.
1.
Place the chassis in a clear space and apply the rear bakes. Attach the foot tray to
the base using the location holes positioned on tbe base casting.
2.
Fit the mast and boom assembly into the chassis socket.

ASSEMBLY AND COMMISSIONING INSTRUCTIONS

WARNING
5
294000.10008 Rev. C