EVVO INTENSA RETRO Manual De Instrucciones página 32

ENGLISH
water tank; if there is no descaler, citric acid can be used instead (the ratio to water is
3:100).
3. Place a cup on the steam outlet.
4. Press the "On/Off button", the machine starts to preheat automatically. Once the
menu of program settings and one of the "Single cup, Double cup & Steam button"
will light up.
6. Press the "On/Off button" to start the descaling function, the "On/Off light" is always
on and the pump began to pump water intermittently.
steam nozzle and brewing head.
8. Descaling will complete automatically after 7 minutes later, the coffee maker beep
three times and "On/Off button" light up.
Note: Add an appropriate amount of water into the water tank if less water found in
the tank during descaling.
9. After descaling, change the water in the tank with clean one, use "Hot water
function" to clean machine twice. Turn on and turn off the "Steam knob" alternately,
NOTE: Shut down and restart the machine after descaling before using, otherwise all
buttons will off position.
17. Problem solving
Symptom
No water
32
CAFETERA ESPRESSO EVVO INTENSA RETRO
Cause
If no water in the
water tank.
Corrections
Add an appropriate
amount of water into the
water tank.