Publicidad
Idiomas disponibles
Idiomas disponibles
Connection with the mains
Connect the device to the mains with the power-plug.
The occupation of the connection-cables is as follows:
Cable
Pin
Brown
Live
Blue
Neutral
Yellow/Green
Earth
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
With the red POWER-switch, you can switch the device on and off.
The lamps begin to burn and the balls rotate both around their own axle and around the effect's main axle.
You can do without a controller as the LED B-20 TCL features a built-in microphone, which provides
automatic sound control. You can adjust the rotation speed with the rotary-control.
With the black Mode-switch you can set Auto or Sound Control Mode.
I = Sound Control Mode: Color change and LED brightness controlled by sound
= Auto Mode: Automatic color change
O
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
If the fuse interrupts, please reset the breaker.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
International
L
N
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
16/30
00046913.DOC, Version 1.1
Publicidad
