EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used for domestic lawn mowing. The
cutting blade must be approximately parallel to the
ground. All four wheels must touch the ground while you
mow.
1.2
OVERVIEW
Figure 1-12.
Start button
1
Start handle
2
Upper handle
3
Lower handle
4
Rear discharge door
5
Battery door
6
Grass catcher
7
Self-propel lever
8
Mulch plug
9
Side discharge chute
10
Bolt
11
Handle knob
12
Handlebar latches
13
Pinch
14
Grass catcher handle
15
Hook
16
Door rod
17
Mulch plug handle
18
Discharge chute
19
Side discharge door
20
Pivot
21
Recesses
22
Height adjustment lever
23
Battery compartment
24
Safety key
25
Battery release button
26
LED Headlight
27
Turbo button
28
Speed control button
29
Fan
30
Blade
31
Spacer
32
Mounting screw
33
2
SAFETY
Make sure that you follow all safety instructions.
WARNING
English
Refer to Safety Manual.
3
INSTALLATION
Do not use accessories that are not recommended by
the manufacturer.
Do not put in the safety key or the battery pack until
you finalised the assembly of all the parts.
3.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
•
If parts of the machine are damaged, do not use
the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
3.2
INSTALL THE UPPER HANDLE
Figure 2-3
1. Align the holes in the upper handle and the lower
handle.
2. Put the bolts through the holes.
3. Tighten the knobs onto the bolts.
4. Do the same operation on the other side.
3.3
UNFOLD THE LOWER HANDLE
Figure 4
1. Pull up on the handle holes to release the lower
handles.
2. Fold the lower handle up until the handle pins lock
into position.
Make sure that the two handle pins are in the same
position.
4
WARNING
WARNING
WARNING
WARNING
NOTE