Hiyasu HS-9UIEK_HOS-9UIEK Manual De Usuario página 28

Remote control operation
Note: this is a general remote control manual, and it can be used for multi-function air
conditioners; for some functions , not included in this model, if the corresponding key is
pressed on the remote control, the unit will continue operating in its original status.
Remote control
SWING key
Key for sequentially activating and deactivating
the direction of the air.
When the button
stop in the current position. This is a universal
control, if the control sends the following three
statuses, the swing status of the main unit will be:
When the slat starts to move up and down, if the
Swing function is switched off, the slot will stop in
the current position.
swings up and down, through five positions.
Remote control name and functions
switches off, the slats will
It indicates that the slat
TIMER ON
Key for selecting the switch on function for
a specific time. The ON signal will flash on
the screen. The symbol
the numeric section becomes the timer pro-
gramming status. During the 5 seconds of
flashing, use keys + or – to adjust the time
value. Each time they are pressed, they
increase or decrease the value by a minute.
If the key is pressed for 2 seconds
continuously, the data will change very
quickly until the key is no longer pressed,
then it will send the information. Once the
timer has been programmed, activate the
Timer On button again.If pressed a third
time, the timer will be cancelled. Before
programming the timer, correct the time.
TIMER OFF
Once the TIMER OFF key has been pres-
sed, the icon will flash to program the timer
switch off. The programming method is the
same as for the TIMER ON key.
- 8 -
+TIMER ON Key
will be hidden,
TIMER OFF Key