Hiyasu HS-9UIEK_HOS-9UIEK Manual De Usuario página 31

Remote control operation
If the remote control gets lost or breaks, press the key for changing to manual mode, which is located
at the rear. The mode will change to AUTO, and it will not be possible to change the temperature or
speed of the fan.
The manual switch works as follows:
In operation: When the unit is switched off,
●
press ON/OFF and the unit will go into the AUTO
RUN mode. The microprocessor will calculate the
inner temperature of the room to select
(COLD, HEAT; FAN) a mode for
pleasant comfort-.
When switched off: When the unit is switched on,
●
press the button and the unit will stop working.
The switch works as follows:
In operation: When the unit is switched off,
●
adjust the switch code to the AUTO mode
and the unit will go into the AUTO RUN mode.
The microprocessor will calculate the
inner temperature of the room to select (COLD,
HEAT; FAN) a mode for pleasant comfort.
When switched off: When the unit is switched on,
●
press the button and the unit will stop working.
Emergency operation
- 11 -
AUTO/STOP
Manual switch
Code switch
(only for some models)