Installation
Instructions
WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1500
WARNING:
Moke surethewosher is unplugged.
m FLUSH WATER LINES
Runsome woter from the hot ond cold foucets to flush
the woter lines ond remove porticles thot might clog up
the woter volve screens.
r21CONNECT TO WATER LINES
Connect the inlet hose ends to the HOT and COLDwater
faucets tightly by hand, then tighten another 2/s turn with
pliers.Turn the water on and check for leaks.
131CAREFULLY MOVE THE WASHER TO
ITS FINAL LOCATION
[] CONNECT DRAIN HOSE
Form o U shope on the end of the droin hose with
the hose pointed toword the droin. Plocethe hose in
o Ioundry tub or stond pipe ond secure it with o coble
tie (not included).
NOTE:If the droin hose is ploced in a stond pipe without
forming o U shop< o siphoning oction could occur.There
must be on oir gop oround the droin hose. A snug hose
fit con olso couse o siphoning oction.
CableTie
LaundryTub
CableTie
StandPipe
CableTie
[] PLUG THE POWER CORD INTO A
GROUNDED
OUTLET
/
@
Insureproperground
exists beforeuse
1
11