GE WSLP1500 Manual Del Propietario E Instalación página 16

Installation Instructions
WASHER CONNECTIONS FOR
TWO-FAUCET CONNECTIONS
If you have two separate water connections, your washer
can be connected to both the hot and cold water faucets.
This kit can be purchased from your dealer or from Parts
and Accessories. In the United States, call 800.626.2002.
In Canada, consult the yellow pages for your local Camco
number.
TO CONNECT THE WASHER:
[] CONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the HOT
and COLD faucets.
[Z]CONNECT DRAIN HOSE
Secure the drain hose to the sink or stand pipe.
Sink
Cable
Tie
Cable
Tie
StandPipe
PORTABLE MODEL WSLP1500--
[] PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
Insureproperground
exists beforeuse
I-4-] I NSTALLATION CHECKLIST
Before starting the washer, check to make sure:
rj Main power is turned on.
rj The washer is plugged in.
rj The water faucets are turned on.
rj The unit is level.
The drain hose is properly tied up.
F_..I There are no leaks atthe faucet, drain line
or washer.
TO DISCONNECT THE WASHER:
[[i] TURN WATER FAUCETS OFF I
[_]UNPLUG POWER CORD AND RETURN
IT TO THE STORAGE AREA
_] DISCONNECT THE DRAIN AND WATER
SUPPLY HOSES
Hang them on the storage rack.
16