Lucky Reptile PRO-Timer II Instrucción De Funcionamiento página 7

Example 2: Let's assume it is Monday, the current time is 2:00 p.m. and you are programming as described in example
1. You complete the procedure and set „AUTO ON" under Mode. Then the connected unit will be permanently on until it
goes off at 16:00 because the programming of „1 ON" on Monday at 8:00 is in the past. Only on Wednesday at 8:00 will
the unit turn on and operate in interval Mode from then on.
Note: If the unit is in interval control and is currently working through the activity time - „INT/A", a countdown display
appears in the display. Then the display changes again and shows the current time and day of the week.
Reset:
Pressing "R" will delete all settings. Clock, weekday, and timer settings will have to be re-programmed. Use this function
only if desired to delete all settings.
Operating with Metal Halide and Halogen Lamps
This timer is able to switch Metal Halide Lamps and Halogen Lamps. But under special circumstances the lamps can
damage the Timer. It is dependent on to the lamp' s electrical size and type of lamp. But also the Mains oscillation does
play a big role while switching on or off the lamps.
Lucky Reptile timers are optimized for operation with Bright Sun and other metal halide lamps, so they are less susceptible.
Damage can still occur in rare cases. To minimize the risk, we recommend not to operate more than three metal halide
lamps at the same time on one timer.
Warranty
The warranty expires in case of modification and repair attempts as well as damaging by force or inappropriate usage.
Neither a guarantee nor any liabilities for detriments or consequential damages in relation with this product will be
assumed.
In case of warranty claims or repairs contact your specialist dealer.
Disposal
Electrical products and gas discharge lamps may not be disposed with household waste. Dispose the product in accordance
with the statutory provision e.g. at municipal collecting points.
Technical Specifications
• Voltage:
• Maximum Load:
• Precision:
240 V~ 50 Hz
see nameplate
± 1 sec/day at 20°C
7