Publicidad
MAINTENANCE
Note!
Before you call the service, please check if you have dealt with the problems yourself
consulting the user instructions.
Problem
•Display is not on
• "Full"is lighting
•"Filter"is
light
ing
•Dryer does not start
•Degree of dryness was
reached or drying time too
long
•The dryer switches off at
the end of the programme
！
Warning!
If you cannot deal with the problems by yourself and need help:
• Press the 【On/Off】button.
• Pull out the mains plug and call the service.
Solution
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the 【On/Off】button.
• Empty water container.
• If the light still remains on, please call the service.
• Clean the lint filter.
•
Connect the tumble dryer to the mains.
• Turn on the tumble dryer.
• Check the the door is closed.
• Check the programme is set.
• Press the【Start/Pause】button.
• Clean lint filter and
• Empty the water container.
not
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level programme or
time programme.
• The dryer switches off automatically for energy
saving. This is not an error but a normal function.
23
heat exchanger
.
Publicidad
