Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Description:
The compressed air pneuMATO 75 grease pump is suitable for the lubrication of machines, vehicles
and equipment with commercial lubricants. The pump is fully automatic in operation. When the trigger
on the lubricating gun is actuated, the delivery of grease will start. If the trigger is released, the pump
will automatically stop the delivery of grease.
Any other use, or modification or alteration to the compressed lubricating equipment is only
permissible after discussions with the manufacturer
Lubricants:
Greases up to consistency 2 (NLGI / Class 2 to DIN 51818) can be used.
Pastes with no lubricating properties (with an abrasive content) or silicon pastes must not be used.
Putting into service and Operation (stationary):
-
Remove the lid from the grease tub.
-
Push the grease follower piston onto the grease in
the tub, until it is visible in the central hole. The
rubber lip must be in uniform contact with the wall of
the tub.
-
Place the dust cover onto the tub.
-
Push the pump unit through the clamp on the dust
cover and the grease follower piston, to the base of
the grease container. Secure the pump unit with the
wing nut.
-
Connect the high pressure armoured rubber hose
with lubrication gun to the pump unit.
Before putting the unit into service, check all
connections for firm seating and leaks.
-
Make the air connection to the pump and ensure that
not more than 8 bar of air pressure is applied to the
pump. As soon as the air feed is applied, the pump
will automatically suck in the lubricant grease. Now
hold the gun open until the grease comes out. Now
release the trigger. When maximum working
pressure is reached, the pump will switch off and is
ready for use.
-
If the equipment is not being used, stop the air feed.
Relieve the pressure in the high pressure hose by
operating the lubricating gun.
Comply with the safety instructions.
High pressure
lubrication gun
deluxe
High pressure
armoured hose
Air connection
Grease
follower
piston
/ English
Linear
swivel joint
Dust cover
Grease
outlet
7
Publicidad
