Publicidad
Idiomas disponibles
Idiomas disponibles
.'
_,_
! I ,%.
•
...................
<_ Changing the On-Screen
Display
_
4_ Virtual Surround
You can check information
about the current disc by pressing
the DISPLAY button on the remote control.
[]
Press the DISPLAY
button dur-
ing playback to show the cur-
rent chapter.
• The elapsed and remaining
playing time of the current chapter will be displayed.
[]
Press the DISPLAY
button to show the current
title.
• The elapsed and remaining playing time of the current
title will be displayed.
[]
Press the DISPLAY
button
to
show the BIT RATE and the
current
repeat
setting.
• If you are playing a dual lay-
ered disc, the layer number will also be displayed ( L0:
Layer 0 is playing.
LI: Layer 1 is playing).
[]
Press the DISPLAY
button to remove the display.
I DVD-VI
You can enjoy surround-sound
effect with two speakers.
[]
During
playback,
press
the
MODE
button
repeatedly
until
the Virtual
Surround
setting
appears.
[]
Press the ENTER
button
to set it 1(Natural
effect),
2(Emphasised
effect)
or OFR
[]
Press the RETURN
button
to exit.
NOTES:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than "STEREO". (for Audio
CD play only)
• This function cannot be used during Dialog Speed.
<_ Black Level Setting
_
[] Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
[] Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
[] Press the DISPLAY button to remove the display.
Hints for the On-Screen
Display
• C,C
- indicates Chapter repeat
• C.T
- indicates Title or Track repeat
• q.A
- indicates Disc repeat
• AC,B - indicates A-B repeat
Marker
Setup
Screen
Use markers to memorize your favorite places on a disc.
[]
Press the SEARCH
MODE
button repeatedly
until the
_1
display screen and Markers
f
.....
...___ __j
appear during
playback.
[]
Press the Cursor
buttons
( _1 or I_ ) to select
1,2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure
that"
:
:
appears
in the display.
[]
When
the disc
reaches
the point you want to
remember,
press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
[]
To return to the Marker
later, press
the SEARCH
MODE
button
repeatedly
during
playback
and the
_1 or I_ button
to choose
the desired
marker,
then
press
the ENTER
button.
NOTES:
• Opening the disc tray or turning off the power or select
AC at step []
and press the ENTER button will erase
all Markers.
• To clear a marker, using the _1 or I_ button, position
the cursor on to the marker number to be cleared and
press the CLEAR
button.
• You can mark up to 10 points.
[]
Press the SEARCH
MODE
or RETURN
button
to
exit.
- 22 -
Adjust the Black Level Setting to make
the black parts of the picture as bright as you prefer.
[]
During
playback,
press
the
MODE
button
repeatedly
until
Black Level setting
appears.
[]
Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
[]
Press the RETURN
button
to exit.
NOTE:
This function cannot be used during Dialog Speed.
(Refer to page 22.)
<_ Dialog Speed
Available only on discs recorded in the Dolby Digital format.
Dialog Speed plays back in slightly faster or slower speed
while keeping the sound quality as in the normal playback.
[]
During playback,
press the
MODE button repeatedly
until the
I_:_o_r . ......................................
]
Dialog Speed
setting appears.
• "OFF" appears on the TV screen.
[]
Press the ENTER
button
or the Cursor
button
( _1
or I_ ) to switch
among
,_J_ (xl.3),
,_ (x0.8)
and
OFR
J_: Plays back approximately
at 0.8 times
of nor-
malplayback.
J_J_ : Plays back approximately
at 1.3 times
of nor-
malplay
back.
[]
To return
to normal
playback,
press
the PLAY
but-
ton.
NOTES:
• Every time you press the STOP button, the setting will
be turned OFR
• Subtitle can be viewed during this function.
• Picture Control, Black Level and Audio (language) set-
ting cannot be changed while using this mode.
• Virtual Surround does not function while using this mode.
• This feature may not work at some point on a disc.
• When using digital audio connection (COAXIAL or
OPTICAL),
the LPCM sound will be output.
• When using the Dialog Speed function with 5.1 channel
digital outputting, the analog output sound will be fixed
at 2 channel.
• When using digital audio connection, only the Dolby
Digital sound will be available.
EN
Publicidad
