Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE POWER ON/OFF BUTTON
Pressing the power on/off button (10) once turns the appliance on.
Pressing the power on/off button (10) again will turn the appliance off.
lf you find that none of the other buttons appear to work, check that the
power on/off button (10) is in the 'on' state.
USING THE FLAME CONTROL BUTTON
Pressing the flame control button (11) once turns on the flame effect.
Repeatedly pressing the flame control button (11) again cycles through
the 3 flame brightness levels: L3–L2–L1–L3.
USING THE THERMOSTAT CONTROL BUTTON
Pressing the thermostat control button (12) once turns on the heating
function. Pressing the thermostat control button (12) again turns off
the heating function. Repeatedly pressing the thermostat button (12)
again cycles through the different heat settings: 17°C–18°C–19°C– .....
–26°C–27°C–ON–OFF.
To display the temperature setting in either Fahrenheit or Celsius,
press the thermostat button (12) on the control panel once, then
press and hold the power on/off button (11) on the control panel tor 5
seconds. The display will switch between Fahrenheit and Celsius.
USING THE TIMER CONTROL BUTTON
Repeatedly pressing the timer control button (13) will set the timer.
The timer interval is shown on the control panel display (8) on the side
of the electric heater. There are 8 timer interval settings: 0.5hr–1hr–
2hr–3hr–4hr–5hr–6hr–OFF.
USING THE BLUE-FLAME BUTTON
Repeatedly pressing the blue-flame button (14) adjusts the brightness
of blue flame, cycling through settings from high to low: Max–Med–
Low–OFF–Cycle.
USING THE FLAME SPEED BUTTON
Repeatedly pressing the flame speed button (15) cycles the flame
speed through 6 different settings from slow to fast: D1–D2–D3–D4–
D5–D6–D1.
Maintenance and cleaning
WARNING! DANGER OF DEATH BY ELECTRIC SHOCK!
-
Before performing any cleaning or maintenance work, unplug
the appliance and let it completely cool down.
Publicidad
