AYR 758 Manual Del Usuario página 18

Be sure to mount the camera carefully.
DO NOT DISASSEMBLE THE CAMERA
DO NOT BEND OR PULL THE CABLE
of the camera, you could damage it.
CORRECT ASSEMBLY
To mount the doorbell camera, first unscrew the door fi-
xing tube and then remove the protective paper from the
3M adhesive on the back of the door (FIG.1). Then place
the camera on the outside of the door making sure that it
is fixed in a vertical position and with the doorbell at the
bottom (FIG.2).
INCORRECT ASSEMBLY
Do not place the camera on the door without sticking it
with the 3M adhesive label. This could cause damage to
the cable as it could rotate freely (FIG.3).
18
WARNING!
EN