Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
9. Still from the backside of assembly, insert the
electric insert (M) into the opening.
Move the preassembled brackets (K) on side rails
(J) along the strip hole of brackets (K) to secure
electric insert (M), tightening preassembled screws
in the strip holes with a Phillips screwdriver. Then,
insert bracket screws (GG) through the round hole of
bracket (K).
Hardware Used
Bracket Screw
GG
10. Still from the backside of the assembly, insert
wood dowel (EE) into bottom frame (B). Attach corner
support (H) to bottom frame (B) using Allen bolts (AA),
spring washers (BB) and flat washers (CC). Tighten
with Allen wrench (DD), but do not overtighten.
Hardware Used
AA
Allen Bolt
Spring Washer
BB
CC
Flat Washer
DD
Allen Wrench
EE
Wood Dowel
9
J
x 4
10
x 1
B
x 1
x 1
x 1
x 2
10
K
J
M
EE
CC
BB
AA
H
Lowes.com
GG
DD
Publicidad
