Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Description
6
4
5
7
10
8 9
Ignition and adjustment
2
3
4
1
2
4
3
5
6
1
2
3
2
1
1. zone indication
2. 0 position
3. High setting
4. Low setting
5. Wok setting (wok burner)
6. Roasting setting (wok burner)
Each burner is fully adjustable between high and low settings.
• Press the control knob and turn it anticlockwise. The burner will ignite.
• Keep the control knob fully depressed for at least 3 seconds
between high and low settings. The thermocouple safety pilot has
been activated.
• Turn the wok control knob until it stops, press it again and turn the
knob further to the low setting (4).
• If desired, turn the wok selector ring to the roasting setting (6).
The inner ring (wok setting) will switch off and the outer ring
(roasting setting) will switch on.
• The wok burner will switch automatically to the wok setting if the
control knob of the wok burner is set to 0.
It is possible to switch between wok setting and roasting setting and
back during cooking.
Please note! If the control knob is in the off setting (0-setting) the
selector ring cannot be changed to the roasting setting. Always turn this
knob back completely to 0!
1. rapid burner
2. standard burner
3. simmer burner
4. wok burner
5. pan support
6. glass top or stainless steel
drip tray
7. timer (option)
8. emergency stop (option)
9. wok selector ring
10. control knob
EN 3
Publicidad
