AUDIOropa xepton T-1R Instrucciones De Servicio página 19

the transmission. All devices must be set to the same channel group number
and each transmitter device must have its own ID number, with one transmit-
ter device having the master-ID „00".
4.4 Pin-layout XLR
4 Pin XLR on the front panel
5. Specifications xepton T-1R
Device type
Dimensions
Weight
Frequency type
Transmission mode
Transmission power
Voice codec
RX-sensitivity
Latency
Data rate
Frequency bandwidth
Power
Power consumption
Range
Frequency response
3 Pin XLR on the rear panel
Transmitter
45 x 220 x 220 mm (H x W x D)
1360 g
ISM 2403 - 2480 MHz
ISM 2.4 GHz FSK modulation with frequency
hopping
Maximum 10 mW
16bit / 8 KHz
-95 dBm
< 35 ms
2 Mbps
2 MHz
USB 5V/DC / 1A
200 mA
up to 350 m
50 Hz - 7 kHz
English 19